Hello Deutschland!

The last two weekshave hadsome big numbers (numbers of readers) coming from Germany. I just wanted to thank everyone in Germanyfor the extraordinary support of ColdThistle. Those 6 and 7K page read daysin the weekly graph? Half are from Germany!



Many Thanks!

Old English vs New English

When I first posted about buying my vintage Raleigh Lady's Tourist, a reader commented that it looks like "the Pashley's grandma" and I replied that they were indeed pretty similar. But after riding the vintage Raleigh around on a daily basis for the past week, I no longer think so. Sure, the overt similarities are there: the loop frame, the upright sitting position, the enclosed chaincase and the general aura of lady-like stateliness. But the ride quality is so very different, that I was compelled to conduct a more thorough comparison.

Those of you who "know bikes" can probably see straightaway that there are significant differences in proportions and angles. The vintage Raleigh's seat tube is considerably more slack (leaned back) than the Pashley's. In the photo above, this difference is undermined by the fact that I've shoved the Pashley's saddle all the way back on the rails in attempts to replicate the other bike's geometry. But if you try to block out the saddle and just look at the seat tubes, you can see it. The other major difference, is that the vintage Raleigh is "all weels", with a relatively short headtube. The Pashley has much smaller wheels and a tall headtube.

Here is a close-up of the wheels and head-tubes, with my body in between for a sense of scale. If you think there is not much difference between 26" wheels and 28" wheels, look again! The vintage Raleigh's wheels are monstrous compared to the Pashley's. Traditionally, both men's and ladies' English Roadsters, as well as Dutch bikes, were built with 28" wheels. However, lately a number of bicycle manufacturers - including Pashley, Velorbis and Retrovelo - have been fitting the ladies' models with 26" wheels, believing this to be a better proportioned choice. I am not sure whether I agree with them. What do you think?

Additionally, there is more space between the saddle and the handlebars on the vintage Raleigh than on the Pashley. The difference is not quite as drastic as the angle of this photo makes it seem, but it is there.

The stem and handlebars are not part of the frame itself, but differences between them should still be noted. The Pashley's stem is taller and has an additional upward-sloping extension (like the Nitto Dirt-drop/ Periscopa stem), to make the handlebars higher. The vintage Raleigh has a classic stem with a horizontal (flat) extension, which positions the handlebars slightly lower. The handlebars themselves are different as well: On the Pashley, the gripping areas are flared outward more than on the vintage Raleigh.

As you may have noticed in the undertones of the past several posts, I prefer the vintage Raleigh's geometry to the modern Pashley's. Of course the Pashley has superior gearing and brakes, but the vintage Raleigh puts me in a more comfortable sitting position, and is faster and lighter than the Pashley. Yes, the 40-year-old clunker is faster and lighter - isn't that just bizarre? I can easily ride it for 30+ miles without being out of breath, whereas on the Pashley I often feel tired after much shorter trips. I am not certain which aspect of their anatomical differences accounts for this. It cannot be due to the 28" wheels alone: Batavus and Gazelle have 28" wheels and I find them to be slower and less comfortable than my Pashley.

In an attempt to make my Pashley more anatomically similar to the Raleigh DL1, I have made some changes: The saddle has been raised and pushed back on the rails as far as it would go, and the handlebars have been tilted downward. I did not take a "before" shot, but on this photo from a few months ago you can see the difference.

The Pashley does feel more comfortable this way, and my leg is almost entirely extended on the pedal now while still enabling me to touch the ground with the tip of my toe if need be. However, the Pashley is still as difficult to accelerate as it was prior to the changes. Hmm. If I had a magic framebuilding wand, I would build a bicycle that would replicate exactly - and I mean exactly! - the frame geometry of the Raleigh DL-1, while adding modern brakes and gearing. As far as I am concerned, the perfect bicycle already exists; someone just needs to start making it again.

Unexpected Sightings

Yesterday was one of the warmest days of September, and we decided to give swimming a try. I've mentioned that there have beenshark sightings on the Cape over Labor Day Weekend. That was more than two weeks ago, but still we chose a beach that was not one of the beaches where the shark sightings were reported. We went to the large and popular Marconi Beach, a beautiful ride from the place we are staying. Well, it looks like we have sightings of our own to report.



Here is a lovely seal, whom we saw once again very close to the shore (different beach than last time). This time I captured him on camera. There were surfers and swimmers in the water very close to the seal, reaching out to him and cooing.



And shortly thereafter, we saw this:



Definitely not a seal.



Yes, it's what you think it is. I have many photos, albeit from a 30-ft distance. The beachgoers began shouting "Fin! It's a fin!" ...and hurrying to grab their cameras. It circled around for a while, while the local children continued to wade in the shallow water. We didn't much feel like swimming after that, but this is the first time I saw a shark this close, so it was a pretty exciting trip to the beach nonetheless.



So... If you are planning a late-season visit to Cape Cod this fall, it is probably not a good idea to swim at any of the beaches along the National Seashore. Just a heads up...

Refurbishing Vintage Bicycles: Different Perspectives

[Manfred Dittler collection, image via waffenrad.at]

It has been so nice to see more and more people revamping vintage bicycles over the past several years, riding them, and sharing pictures with others. Seeing vintage bikes actively ridden and lovingly cared for feels as if history is "interacting" with our contemporary lives - reestablishing a sense of continuity that has been ruptured in many ways over the past several decades. But as the use of vintage bicycles grows more popular, it is worth noting that not everybody holds the same views on refurbishing them. For me, discovering these differences has been educational, and I will try to describe some of the approaches I have come across:



[Panther Damenrad, image via waffenrad.at]

The Full Restoration Approach

To "restore" a bicycle typically implies bringing it back to its former glory inasmuch as possible. If the bicycle is not in great cosmetic shape, then this may include re-painting the frame in a colour painstakingly matched to the original, finding new-old-stock original decals or replicas, and taking the trouble to locate well-preserved versions of the components and accessories, if the original ones cannot be cleaned up sufficiently well. The end goal is for the bicycle to resemble as closely as possible what it looked like when it was sold as new - be it the 1970s or the 1910s.



[Manufrance Hirondelle, image via collectvelo]

The All-Original Approach

In direct opposition to those who restore bicycles, are those who prefer to keep them all-original - meaning in whatever condition the bicycle was found. The reasoning behind this approach, is that a vintage bicycle is a piece of history and should be preserved in its found state. Some who adhere to this method will clean up the components and frame as much as possible - as long as it does not involve repainting or replacing anything on the bike. Others will take things to the extreme and literally leave the bicycle as is - including any dirt or rust that has accumulated on it. Somewill perform repairs, as long as the components remain original; while others believe that if the bicycle is not ridable without repairs, then that is how it should stay.



[somervillain's Shogun touring bike, image via lovely bicycle]

The Period-Appropriate Approach

This approach is somewhat similar to restoration, but is considerably more relaxed and is done with the intent for the bicycle to be ridden, not collected or exhibited. Those who prefer this method, typically clean up and refurbish the bicycle in a way that keeps its appearance period-appropriate without going so far as to replicate the original components, accessories and colour scheme. For example, the bicycle above has been repainted a soft blue - a traditional colour choice for vintage touring bikes, but not the original frame colour. The components selected are also traditional for the time period the owner wanted to evoke, but they are not the components that originally came with this bike. The period-appropriate approach is popular among those who want the bicycle to suit their tastes and riding style, while still paying homage to the era from which it came.



[Motobecane Super Mirage, imagevialovely bicycle]

The Updated Remix Approach

Some cyclists prefer to fit vintage frames with modern components - either in part or entirely. The reasoning behind this, is that while they may prefer the looks, ride quality, craftsmanship and other aspects of the older frames, newer components tend to be more comfortable and more convenient. This can include anything from using a modern style of handlebars, brake levers and cranks, to fitting the bicycle with clipless pedals and new high-tech lights. While the newer components are not even remotely original or period-correct, some owners will attempt to make the overall look of the bicycle harmonious. To others this does not matter so much, and they regard the vintage and modern mix as purely utilitarian. If I had to classify the current fixed gear modification trend (whereby parts of the frame are filed off and the bike is fitted with super-modern wheels and colourful components), it would go in this category as well. The degree of consideration that is given to the original frame is up to the owner.



[Jeunet porteur, image viasomervillain]

Over the past two years, I have spoken with vintage bicycle owners whose approaches run the full spectrum of these categories, and have at times been amazed by how strong views on this topic can be. Restorers are criticised for recklessly altering pieces of history. Those who keep vintage bikes original are criticised for not giving the bicycle a chance to "live again". Those who take the trouble to set up their bicycle in a period-appropriate manner are perceived as obsessive "retrogrouches." And those who put modern components on vintage frames are accused of butchering or "not caring enough" about vintage bikes. Personally, I can see the benefit in all methods, and I think that quite a lot depends on the bicycle itself - how rare and historically significant it is.The Co-Habitant and I have used the "updated remix" approach at least to some extent on most of our vintage bikes - but none so far have been historically valuable. What is your take on this, and what approaches have you used on your own bikes?

Hodgepodge

All photos taken on September 10, .. - - Southwest Montana

Gunclub day II

We awoke to more snow and terrible roads, so we opted to head to the Gunclub again to do some different lines, since we got so drenched on NRA yesterday. We decided to start on Caveshot WI 4+. It was running just like NRA. We climbed it and got soaked just like NRA. The ice was a little more consolidated and the line climbed much better than NRA. After bringing Laura up to me on the belay ledge, everything was frozen solid and we opted to rap down and head out. On the way down I shot some cool shots of a near iceless Internet Connection WI5+ M6/7. (It climbs the overhanging wall with the blobs on it to the right of the rope). We had a blast even though it was 15° and running like crazy. Can't wait to get out on Sun day.

Rusted Truck

Near the log cabin area at the edge of the meadow we found the remains of an old truck, probably an old Model T. Near it was one of it's tires. When we first went into the canyon many years ago there were several old trucks and wagons and many have been taken out by either the forest service or visitors to the area.