Monday, March 19, 2012

Beach Weather

Carson Beach

Ever been to the beach on a cold, rainy day?It can be brutal. It can also, every so often, surprise you with a microcosm of serenity. Finding myself in South Boston on a wet afternoon, I stopped by Carson Beach before heading home. Some Greater Boston residents balk at the mention of South Boston beaches. Too urban. Too gritty. Too close to the airport. The water is freezing. The harbor is polluted. But when I visit the 5 mile walkable, cyclable stretch of shoreline, I see an intriguing, beautiful landscape. There are hills, fortresses, turn of the century pavilions. Views of the islands, the Atlantic Ocean and the city skyline surround. There is some difficult history in this part of town. And there are people eager to forget it, enjoying their evenings after a day of work, watching planes take off over the water. Boston-Reykjavic: 5 hours. Boston-Dublin: 6 hours. Boston-Paris: 7 hours. The rest of the world is really not that far.




Carson Beach

But on a rainy day in March no one was watching the planes take off or sitting on the beach. The shoreline paths lay abandoned, strewn with wet sand from the latest storm.




Carson Beach

On the boardwalk I saw an off duty policeman jogging. I saw a young woman pushing a baby carriage, adjusting the cover when the rain began coming down harder. I saw an elderly man get out of a parked car and stand in the dunes looking straight ahead, then get back in the car and drive away.






Carson Beach

Closer to the water, it suddenly grew warmer and the wind quieted down. I stepped out onto the sand and took a few strides forward.The harbor looked still as glass.There was a breeze behind me, but not ahead of me, as if the boardwalk served as some sort of microclimate border that day.




Carson Beach
The quality of light was different too. To my right, the sand looked beige and the water a pale gray.But to my left was a patch that almost looked sunny - warm saffron and turquoise.




Carson Beach
The dunes looked soft and inviting,I would hardly guess theyhad been covered in snow only days earlier.




Carson Beach

A solitary boat stood, tilted, in the shallow water. Later I learned it had spent all winter in that same spot. As I studied its curious presence, the air was still, almost stuffy. This could be a summer sunset.



Carson Beach
But only yards behind me it was raining and some degrees colder. The shuttered up snack shack glistened in the fading light as I cycled past.




Carson Beach
Closer to the street, the wind picked up, the tree branches groaned, the rain became insistent. I zipped up my jacket and began to make my way home, leaving South Boston - and beach weather - behind.

Sunday, March 18, 2012

Bicycles in Product Branding


Having dabbled in marketing in the past with an emphasis on branding, I am always interested in the associations manufacturers use to add appeal to their products. And of course when bicycles are involved I take notice. Looking at how bikes are presented in product branding, there are multiple themes. For instance here is a cycling cow selling ice cream. It's a cute image but why that specific cute image? Well, let's see... The cow is riding a vintage delivery trike loaded with steel dairy containers. So the idea here is to associate the brand with old fashioned methods of production and distribution. This is echoed by the word "creamery" in the name.





And here the idea of cycling is subtly used to associate the "zero calorie" lemonade with weight loss, while the penny farthing imagery goes nicely with lemonade's old fashioned appeal. There's the "honest" thing as well, which I've noticed in other foods that picture bicycles on the label. Do we associate bicycles with honesty?





Wholesomeness maybe, or nature - suggesting that the food is organic and "honestly" obtained regardless of whether that is so? Could be.





Penny farthings are used as symbols of old timey-ness across product categories. This perfume manufacturer uses it to suggest vintage elegance, congruently with the antique look of the bottle and the distressed label. Curious, I smelled the perfume. Sort of floral and dusty, but not too heavy. I suppose it goes with the vintagey presentation, though personally I associate cycling with fresh air and not perfume.






At the same time, bicycles can just as well be used as symbols of contemporary culture.





I see more and more clothing and accessories where bicycle references serve as shorthand for a "hipster" identity. "This garment is for the cool urbanite who rides bikes, or wishes they did."





The bicycle can also suggest fun, whimsy, levity. Drinking from these cups promises to be fun because of that bicycle imagery. To some extent this might also be behind the increasing popularity of bicycles on alcoholic beverage labels.






Do bank notes qualify as a product? I guess they do. Someone designs them after all, with both function and aesthetics in mind. While in Antrim, I was intrigued to discover there is an antique path racer on the Northern Ireland 10 pound note. I looked it up, and learned it is in honour of John Dunlop, who invented the pneumatic tyre whilst living in Belfast. So here the bicycle is part of a narrative about heritage - with additional implications of self-sufficiency and freedom of travel. More than anything, I find it delightful to know that about a million people in Northern Ireland are walking around with pictures of vintage bicycles in their pockets.






There is always talk among bicycle activists about how to create positive associations with cycling in the public's eye. Meanwhile, other industries harness the already existing positive associations to enhance the appeal of non-bicycle-related products. Interesting how these things connect, overlap and feed off of each other.






I wonder to what extent it is cyclists who find bicycle-branded products appealing because they identify with the bicycle, as opposed to non-cyclists whose imagination is engaged by the mere idea of the bicycle. I suppose it is probably both.

Thursday, March 15, 2012

Animals at Lions, Tigers & Bears


Like their name implies, there are in fact lions, tigers and bears...well, actually *a* bear at this neat place. There are many other animals there too. Some of the first ones you see are the emus.



You can get very up close and personal with them, but they do not recommend doing so because they bite. While I was trying to get better pictures of the emus, the donkeys decided I was there to see them and wandered over.



Without meaning to, I did get up close and personal with them. Hello, there!



Same thing happened with the deer. They must be paparazzi friendly creatures. "This is my better side!"



I did not get up close and personal with this hybrid wolf/dog breed.



Or this hybrid cat. Although it does look nice and cuddly, they assured us that is not usually the case.



And who could resist this sweet face? Apparently not it's former owner that spoiled it rotten until it got to be too much to handle.



I could resist these not so exotic creatures because I still have flash backs to being sent out to collect the eggs and having to fight with the feisty animals to get them.



I know, you want to see the lions, tigers and bear. They will have to wait for another day though because I still have to edit their pictures! In the meantime, can't you just picture a place where chickens and tigers share space together? Ok, I couldn't either before this visit!



Living the life in warm Florida!


Wednesday, March 14, 2012

A Brief Visit to Bryce Canyon

Monday morning I left Salt Lake City and took the “scenic route” south out of Utah – US 89. I ended up spending the night at a little campground in the Escalante National Monument. It was a cool day and got even cooler overnight – frost covered the front and rear windows in the morning and the temperature was a brisk 26 degrees! It didn't take long to get ready and get on down the road that morning!



Tuesday, November 29th - - It was a pleasant drive to Bryce Canyon National Park and I was able to spend about four hours there. I drove through the park stopping at many of the viewpoints along the way. There were very few people around and traffic wasn't a problem at all – unlike in the summer time. There was some snow on the ground but the sun was shining and the 50 degree temperature felt much warmer.





This and the next three photos were taken at Sunset Point. Elevation 8,000 feet.









Taken from Bryce Point. A 1.3 mile trail winds its way through the canyon.



Another view of the trail into the canyon. It would have been neat to go down amongst the towering hoodoos, but I just wasn't up to that kind of challenge at that time.





Taken from Rainbow Point, elevation 9,115 feet.



Another shot from Rainbow Point.

Quick coffee in quiet Vrijthof







I like my terrace view: The Vrijthof -- Sint Janskerk, Sint Servaasbasiliek and the Hoofdwacht.




Nowadays I drive to all 4 corners of the
Netherlands. Each week I burn between 700 and 1000+ kilometres and that makes
me the queen of the road =)





Last week I was in Maastricht which is
200+ kilometres from Amsterdam. Maastricht is located at the southern tip of the Netherlands bordering Germany and Belgium. I have a business partner here and we finished
the meeting earlier than expected. I saw that I have a few
missed calls, as well as I can see continuous emails coming in to my phone so I decided to work a bit before driving back to the Randstad. A quick swing by at Vrijthof(the main big square of Maastricht)for some coffee while I check and answer my emails and call back people would be the best scenario.




While sitting at a café terrace on
Vrijthof and sipping my coffee it dawned on me that I really liked my job. Even if it is stressful.
Even if sometimes I feel the heavy weight of the responsibility. Even if I have to juggle, find out, search and justify things on my own.




Vrijthof before 12 noon is very quiet. I
have never seen Maastricht this still. However, I noticed people trickling into the square when I left about half past 12. Many of them with cameras hanging from their necks.




It was nice to have seen the quieter side of Maastricht.







































Sunday, March 11, 2012

Shifter Placement on a Mixte: an Aesthetic and Functional Challenge

Porteur Bars, Elkhide Grips, Inverse Levers, Silver ShiftersI've been asked to describe how the shifters are set up on my mixte, but I hesitate to write about it, because I don't necessarily recommend this method. My handlebar setup consists of inverse brake levers, elk hide grips covering the entire handlebar, and bar-end friction shifters mounted upon "thumbies" up toward the front. The rationale here was to leave as much of the handlebar area uninterrupted as possible, allowing for a variety of hand positions. It works nicely in that context, but it is not for everyone - which brings me to the issue so many have written to me about: There seem to be few options for mounting gear shifters on a mixte with upright handlebars that are both elegant and convenient. Personally, I find my own setup not entirely elegant: Too many cables up front. And it's not entirely convenient either: The levers can only be reached when the hands are in the aggressive forward position on the bars. But what other possibilities are there?



Shimano Shifters and Paul Thumbies on Betty FoyOne alternative is to move the shifters closer to the edges of the handlebars, so that they are near the brake levers. This placement is more convenient if that is the position where you tend to hold your hands the most, and since I've been using my own mixte more and more as a city bike I am considering switching to something like this. The problem, however, is that placing the shifters here interrupts the handlebars and limits potential hand positions: It will not be possible to slide my hands back and forth along the bars the way it's possible on my current mixte set-up. Also, it's essential to get the angle of the shifters just right, and doing so does not always result in attractive placement. Finally, both with my current set-up and with the set-up pictured above, there is something messy-looking to my eye in having so many cables sprouting from the handlebars. I have not been able to find a way to make handlebar-mounted shifters look attractive.



Royal H Handlebars, Take 1: Porteur, Guidonnet, Bar-EndsA potential way to clean up the handlebar setup from the "messy cables" look while keeping the shifters within reach is to opt for bar-ends. I tried this prior to my current setup, but quickly discovered that this works well only with the wide Nitto Albatross bars used by Rivendell, and ideally on a bike with a long virtual top tube and/or with the handlebars raised high. Otherwise, you may discover that the bar-end shifters will poke you in the knees to the point where it could interfere with pedaling on turns. That is exactly what happened when I tried them on my small sized mixte with narrow Porteur bars.



Mercier UpdatesIf none of these methods appeal to you, you can go the vintage route - one possibility being to mount the shifters on the stem. However, generally this is not recommended for a number of reasons. Some claim that mounting the shifters in this spot is dangerous, because they could potentially "impale" you if you fall forward on your bike. To me this seems rather far-fetched: After all, it's common to have bruises on your thighs from bumping into bar-end shifters, yet no one claims they are dangerous. I think the real reason stem shifters are disliked is that they are considered to be a symbol of lower-end bikes: In the '70s, stem shifters meant that a bike was marketed for amateurs who held their hands mostly on top of the handlebars and were unable to reach downtube shifters.



Mercier Mixte: Headtube Lugs, Downtube ShiftersBut while downtube shifters offer elegance and simplicity, removing the second set of cables from the handlebars entirely, most cyclists who are looking for an upright mixte find them difficult to use. In order to shift gears, you have to remove you hand from the handlebars are reach quite a ways down. Particularly if you are sitting upright, this is inconvenient - not to mention beyond the skill level of some cyclists.

Belleville Handlebars, Dia Compe LeversAs far as aesthetics go, a mixte frame is a challenge to set up, because the twin lateral stays already add a degree of visual complexity to the looks. If you add a cluttered handlebar set-up to that, it can get pretty messy. In vintage photos and in handmade bicycle shows, the cleanest looking mixtes tend to be set up either as single speeds, with hub gearing, or with single chinrings - ensuring that there is, at most, only one shifter to deal with. But in practice, most mixtes today are set up with derailleur gearing and either double or triple chainrings - presenting an aesthetic and functional challenge.

While I cannot offer a solution that would suit everyone's tastes, I wanted to share the methods I know of and the pros and cons of each, as I see them. How have you set up the shifters on your mixte, and are you happy with them in terms of user-friendliness and looks?